Welcome Guest [Log In] [Register]
Welcome to SCALE RACING LOBBY. We hope you enjoy your visit.

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

Join our community!

If you're already a member please log in to your account to access all of our features:

Username:   Password:
Locked Topic
PHOTO BACKDROP; Simple back drop
Topic Started: Jan 19 2007, 06:35 PM (466 Views)
Member Avatar
[ *  *  *  *  * ]
Just a simple back ground for pics.
Materials-A sheet of foam board which can be picked upWal-Mart or a craft store,Colored poster paper or craft paint, craft adhesive and duck or masking tape.
1- decide how tall you want your walls{ mine run about 8in.} and mark them on the foam board.
2-take a hobby knife and cut the corner out,WARNING DO NOT DO THIS ON YOUR WIFES KITCHEN TABLE :wacko: , flip the foam board over and cut through the fist layer of board the lenght of the walls.
3- bend the walls up at 90degrees, now is a good time to put the poster paper on the floor or mark where you will paint them.
4-fold the walls down and paint or install poster paper. I cut strips of paper about 2.5 to 3in. wide to create two tone walls. glue the paper to the walls.
5-Fold the walls back up and tape the corner on the back side, install your tools and junk, place a model in it and shoot your pics. B)

Posted Image
Posted Image
Posted Image
Posted Image
Hope you have fun with this.
Offline Profile Goto Top
« Previous Topic · TIPS & HOW TO · Next Topic »
Locked Topic