Welcome Guest [Log In] [Register]
Welcome to SCALE RACING LOBBY. We hope you enjoy your visit.

You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.

Join our community!

If you're already a member please log in to your account to access all of our features:

Username:   Password:
Locked Topic
Vertex Magneto; scratch built mag
Topic Started: Jan 19 2007, 06:33 PM (557 Views)
Member Avatar
[ *  *  *  *  * ]
Cut to length: 1/16-.625,3/32-.500,1/8-.400,5/32-.400,3/16-.300. Put a tiny bit of glue on the end of each tube as you slide the inside each other. Make all the ends flush except the 3/16, make it flush with the bottom of the 5/32. After it has dryed start with a small drill bit and work yourself up to a .063 hole in the end of the mag as per pics. Paint the cap Flat Brown, glue 8 pieces of plug wire in the hole and instant Magneto. Drill a .063 hole in the engine block , glue mag and your ready to fire that bad boy up. Hope this helps out .
RonR WHOOPS Pics are in reverseorder :rolleyes:
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Pic of finished mag would not edit, so you will have to check out my phtobucket to see it.
Offline Profile Goto Top
« Previous Topic · TIPS & HOW TO · Next Topic »
Locked Topic